Browse all practice questions for the Wastewater Lab Analyst Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Wastewater Lab Analyst Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which term refers to the process of killing pathogenic organisms?
  • What is the correct procedure to prepare for a total metals test after rinsing with tap water?
  • Using the membrane filter procedure, at what temperature should total coliform cultures be incubated?
  • What does MPN stand for in microbiological analysis?
  • What temperature should the oven be set to for a Total Suspended Solids (TSS) test?
  • 1000 mg is equivalent to how many grams?
  • What process is used to prepare samples for metals analysis?
  • Which class of fire extinguisher is suitable for grease fires?
  • How does activated carbon function in water treatment?
  • At what angle is light measured in a turbidimeter?
  • What type of samples require refrigeration for proper preservation?
  • What is the hold time for fecal coliform analysis?
  • What acid is added to the sample bottle prior to sampling for iron and manganese?
  • A desiccator is used for what purpose in the laboratory?
  • What should be used to rinse pipets prior to phosphorous analysis?
  • What is the hold time for nitrate-nitrite samples?
  • Which method is often used to determine BOD levels in wastewater?
  • The conductivity of de-ionized water should have how many microhmos/cm?
  • Fume hoods should be used when what concentration of volatiles is present?
  • What additional information should be listed on a chemical container besides the date received?
  • What is the main reason for using sterilized bottles for bacti sample collection?
  • How many analyses must be completed to determine a minimum detection limit (MDL)?
  • What is an example of a temperature dependent reaction?
  • What is the primary function of a desiccator in a laboratory setting?
  • What is the appropriate action when a reagent bottle is found to be unlabelled?
  • What action should be taken if a sample label is incomplete?
  • What is the impact of using non-homogenized samples in COD analysis?
  • What may happen to dissolved oxygen levels in warmer water?
  • What method is primarily used to determine Total Dissolved Solids (TDS) in water samples?
  • At what temperature is it most accepted to preserve samples for refrigeration?
  • Which indicator is used to test alkalinity?
  • Where can OSHA regulations be found?
  • What is added to a bacti bottle to remove chlorine?
  • In waste management practices, what does "reducing" refer to?
  • What is a sample that has been built up from a series of samples taken at intervals during a fixed sampling period called?
  • With which substance should sulfuric acid not be stored?
  • Total Kjeldahl Nitrogen (TKN) is comprised of which components?
  • What is the hold time for residual chlorine samples?
  • Class "C" fire extinguishers are for what type of fire?
  • Which term describes a method’s ability to produce the same result on repeated trials?
  • What size filter produces contaminant free water?
  • What does the term "chain of custody" refer to in laboratory practices?
  • What is a duplicate in the context of laboratory analysis?
  • Digestion in the phosphorous test produces which of the following?
  • What type of container is recommended for collecting ammonia samples?
  • What type of glassware is most appropriate for the preparation of a stock standard?
  • How is alkalinity generally preserved in samples?
  • Which method is typically used for determining the concentration of nitrates in water?
  • Which chemical is often used to preserve acidity in a water sample for testing?
  • In water chemistry, what does TDS stand for?
  • Where should you look to find approved methods, besides standard methods?
  • What document is essential for tracking samples from collection to reporting?
  • What is the standard unit for measuring the concentration of a chemical in solution?
  • What equipment is commonly used when preparing a standard solution?
  • Which factor has the most significant influence on the solubility of dissolved oxygen (DO) in water?
  • What is the proper preservation method for alkalinity samples?
  • When should sodium thiosulfate be added to the coliform sample container?
  • If acid splashes into your eyes, what is the first action you should take?
  • What is the holding time for metals in sample analysis?
  • What type of graph paper is used for ammonia/fluoride control curve?
  • What should be done with containers that contain magnesium or other metals before reuse?
  • In environmental sampling, why is it important to maintain a dry environment?
  • Which type of gloves is typically used in n-hexane analysis?
  • Which of the following is true regarding the jar test?
  • When using strong acids and bases, where should an analyst work?
  • What test determines the purity of reagent grade distilled water?
  • What additional process improves type 1 reagent water after distillation?
  • Which property of a solution is measured to assess its acidity?
  • What is the primary role of activated carbon in water treatment processes?
  • If an analyst disrupts a control point, what should they do next?
  • What purity of ethanol is commonly used for preparing some standards?
  • What is the concentration of the titrant used for alkalinity?
  • Which substance interferes with ammonia measurements?
  • What is the maximum hold time for Chemical Oxygen Demand (COD)?
  • Which property is most critical when determining water quality in relation to hardness?
  • What is the endpoint pH for total alkalinity?
  • What do TD and TC signify regarding glassware in a laboratory?
  • What essential information should a sample label include?
  • Which method is commonly used to evaluate the presence of organic pollutants in water samples?
  • What is the proper rule for mixing acids and water?
  • Why is it important to monitor the temperature of wastewater during treatment?
  • Why is a water bath used for incubating fecal coliform samples?
  • Where can primary drinking water standards be found?
  • What is 10,025 rounded to three significant figures?
  • What is the pH endpoint for alkalinity titrations using phenolphthalein?
  • Where should a sample be placed after a known volume is filtered for TDS analysis?
  • What glassware will most accurately measure 100 mL of solution?
  • What is the primary concern when purchasing buffers for laboratory use?
  • What instrument is used to measure dissolved oxygen in water?
  • What type of sample is used to analyze oil and grease?
  • Which test is commonly used to measure the concentration of organic matter in wastewater?
  • What magnification in a microscope is typically used to view filamentous bacteria?
  • What does conductivity also measure in water samples?
  • Why is pre-treatment of distilled water important in laboratory settings?
  • Hardness values in water are commonly expressed as equivalent to which compound?
  • How do you reunite a liquid column in a thermometer?
  • What is the primary purpose of rinsing glassware with HCl in metal analysis?
  • In chemistry, what does the word Normality mean?
  • What is the sludge concentration of a sample containing 7% sludge?
  • A volumetric pipet is usually used with which of the following?
  • Coliform are indicators for?
  • In wastewater analysis, what is the significance of measuring pH?
  • What pH is ammonia adjusted to with borate buffer during distillation?
  • What is the correct sequence of the nitrification cycle?
  • What is the purpose of using sodium thiosulfate in chlorinated samples?
  • What is digestion in the context of wastewater analysis?
  • You have 0.01 mg of Manganese in 200 mL. How much do you have in 1L?
  • What type of control curve should be used with graph paper?
  • Which laboratory equipment is essential for accurate measurement of liquids in small volumes?
  • What kind of samples is sodium thiosulfate typically used to preserve?
  • What is the typical hold time for a sample after it has been collected and preserved?
  • Which characteristic is NOT typically used in indicating sample integrity?
  • How long can ammonia samples be held if preserved and refrigerated?
  • What is the maximum allowable temperature for sample refrigeration according to best practices?
  • What is the common temperature range for incubating coliform bacteria cultures?
  • What is the endpoint for phenolphthalein alkalinity testing?
  • What is the titrant for alkalinity testing?
  • Which instrument would you use to measure the pH of a solution?
  • How is the multiple tube fermentation technique for fecal coliform performed?
  • Who has the authority to regulate confined spaces in the workplace?
  • Where are coliform organisms most prevalent?
  • Why should a chlorine residual be maintained in a water system?
  • The reproducibility of a method when repeated on a homogenous sample under controlled conditions is referred to as what?
  • Which type of ions are attracted to cathodes in electrochemical reactions?
  • What does the term "sludge" refer to in wastewater treatment?
  • What is the primary goal of wastewater treatment?
  • What is the standard incubation temperature for BOD testing?
  • E. coli represents the presence of what?
  • Why must chlorine residual samples be analyzed immediately?
  • Coliforms are indicators for which type of microorganisms?
  • What type of flask should always be used when making stock standards?
  • What is the titrant used for amperometric titration of chlorine?
  • A single sample taken without considering time or flow is referred to as?
  • What is the incubation temperature for total coliform?
  • How to report TNTC on fecal coliform analysis?
  • Results of bacti test are expressed as what?
  • What is the main purpose of the jar test in wastewater analysis?
  • What is the most common type of probe used in a DO meter?
  • What is the consequence of exceeding the hold time for chemical samples?
  • Which of the following is often a standard procedure in wastewater sampling?
  • What size bottles should be used for setting up BOD samples?
  • Why is consistent temperature important in incubating water samples?
  • To assure greatest safety, how should all chemicals be stored?
  • If hydrogen ions increase in a solution, what happens to the pH?
  • At what temperature should fecal coliform membrane filter plates be incubated?
  • What common treatment process is used to remove suspended solids in wastewater?
  • How does biological oxygen demand (BOD) relate to wastewater treatment?
  • At what temperature is volumetric glassware generally calibrated?
  • Looping an extended sample to eliminate outliers in data analysis is an example of what method?
  • The jar test is used to determine what?
  • How should bottles be prepared for metal analysis?
  • What chemical is commonly used to make water more alkaline?
  • What is the purpose of homogenizing a sample during COD analysis?
  • Which of the following represents the three primary waste management methods?
  • In the lab, what does the term buffer refer to?
  • What is the requirement for bags used to collect bacterial samples?
  • When conducting a BOD calculation, what do you do with the seed correction factor?
  • What information should always be included on a sample?
  • What is a typical characteristic of a reagent grade chemical?
  • What is the regulatory factor for the safety of confined spaces in industry?
  • What does improper sample preservation most likely lead to?
  • What is the main purpose of adding coagulants in wastewater treatment?
  • When purchasing stock chemicals, what should be primarily indicated?
  • Cadmium reduction converts which of the following?
  • Which organism must be present for a bacti sample to fluoresce?
  • How long does it typically take for an autoclave to reach 121 degrees Celsius?
  • Which of the following is a key factor affecting the rate of chemical reactions?
  • What acid is used to preserve ammonia in a sample?
  • What term describes an organism that can cause a disease?
  • What is the primary purpose of sodium hydroxide in water treatment?
  • Why is constant stirring important when testing for ammonia in samples?
  • How often should eye wash stations and safety showers be checked?
  • What is the correct procedure to follow when a mistake is made on a bench sheet?
  • What role does refrigeration play in the preservation of water samples?
  • What are outer shell electrons termed as?
  • Which of the following is a characteristic of a good laboratory practice?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy